Peaty's Monarch Grips - Lockrings

The Peaty's Monarch Lockrings are made from 6061 aluminium, have a slimline 8mm wide clamp, and are secured with 3mm stainless steel bolts so you don’t need to worry about stripped or rusted heads. They have laser etched logos and an orientated Peaty’s logo on the grip end help you position the grip offset correctly while letting other riders know you’re ready to rule the trail Peaty’s style.

Key Product Features
• Two lockrings with 3mm allen key bolts
• Slimline 8mm wide clamp to maximise grip area
• Made from 6061 aluminium with stainless steel bolts
• Available in 12 colour options
• Left / Right markings on each clamp
• Cardboard only backing board with paper locking wire

Installation is easy

1. Loosen the 3mm Allen key on the lockring.
2. Remove your Monarch grips from your bars and pull off the old lockrings.
3. Re-fit new clamps, ensuring the correct side is fitted to the correct grip using the L & R markings engraved above the Allen key.
4. When fitted correctly, the flat edge of the lockring should touch the rubber of the grip and the Allen key should face the rider.
5. Re-fit grips, following our grip application steps. Tighten the 3mm Allen key bolt on the lockring to 3Nm.
6. Ride!

We use a premium delivery service to deliver all of our bikes to ensure they arrive in the best possible condition. Bicycles from a different warehouse so may arrive separately to any other items ordered. A signature is required to confirm proof of delivery.

All products are sourced from official importers and covered by manufacturers warranty. If you do need to send items back to us please make sure that you retain proof of postage in the event that it is needed.

Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.