Fox - Mounting Hardware
Couldn't load pickup availability
If you are ordering - Bikes - online, please call us to discuss delivery instructions before completing your purchase. Please be aware that bikes cannot be shipped directly to customers in their original packaging; however, we can arrange for them to be on-shipped once prepared. Additionally, please note that an assembly fee applies.
Need help choosing the right size?
FOX - MOUNTING HARDWARE
If your rear shock already has the metal hardware pieces pressed into the top and bottom eyelets, follow these steps:
- Measure the Width: Place the calipers on the outside edges of the hardware. Measure the total width from side to side in millimeters (e.g., 22mm, 30mm).
- Measure the Hole: Measure the inside diameter of the inner sleeve hole where the bolt passes through (typically 6mm, 8mm, or 10mm).
E.g: If your total width is 22mm and the hole is 8mm, your hardware size is M8 x 22mm
If you are building up a bare frame or the old hardware is worn or missing, you can measure the frame tabs directly:
- Measure the Frame Gap: Insert the inside-measuring jaws of your calipers between the frame's mounting tabs where the shock sits. Measure the internal width in millimeters.
- Measure the Bolt: Take the frame's shock mount bolt and measure the outside diameter of the smooth shaft (not the threaded tip).
Note: Always check both ends! The front frame mount (top of the shock) and rear frame mount (bottom of the shock) often use completely different widths. Be sure to measure both.
We use a premium delivery service to deliver all of our bikes to ensure they arrive in the best possible condition. Bicycles from a different warehouse so may arrive separately to any other items ordered. A signature is required to confirm proof of delivery.
All products are sourced from official importers and covered by manufacturers warranty. If you do need to send items back to us please make sure that you retain proof of postage in the event that it is needed.
Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.