Home » Enduro Radial Bearing MR 24371 24 x 37.1 x 7
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Radial Bearing MR 24371 24 x 37.1 x 7 - Papanui Cycles
Enduro Bearings SKU: BEEN1088

Enduro Radial Bearing MR 24371 24 x 37.1 x 7

(0)
$17.00 includes GST
Variant
Please Note

If you are ordering - Bikes - online, please call us to discuss delivery instructions before completing your purchase. Please be aware that bikes cannot be shipped directly to customers in their original packaging; however, we can arrange for them to be on-shipped once prepared. Additionally, please note that an assembly fee applies.

Need help choosing the right size?

Read our guide or get in touch

MR 24371 LLB-E - ABEC-3, Radial Bottom Bracket Bearing for Trek BB90 and SRAM GXP and Shimano 24mm cranksets - 24mm x 37.1mm x 7mm -

ABEC-3 Radial Bottom Bracket Bearing featuring 52100 High-Carbon chromium alloy races paired with grade 10 Balls with 90% fill, high-pressure, water-proof grease.

This is a unique custom bearing that is not used a lot, but when you need it, its a major problem solver.

Trek BB90 bottom brackets require the bearing to be directly pressed into the BB shell that is often made from material that is softer than steel, and over time quite often the bearing seat can become slightly oversized from use. These replacement bearings have been made just slightly oversized (0.1mm) to compensate. This version features a 24mm ID used for Shimano 24mm cranksets and SRAM GXP non-drive-side installation. For drive-side SRAM GXP cranks we also make MR22371 for the same oversized BB90 issue.

The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

Static load - 726lbf / 3.22kN
Weight - 31.1g

We use a premium delivery service to deliver all of our bikes to ensure they arrive in the best possible condition. Bicycles from a different warehouse so may arrive separately to any other items ordered. A signature is required to confirm proof of delivery.

All products are sourced from official importers and covered by manufacturers warranty. If you do need to send items back to us please make sure that you retain proof of postage in the event that it is needed.

Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.