Introduction
Inspired by the Fashion Capital of Europe the NCM Milano + is designed to ride as elegant as it looks.
This E-bike is designed with a tough aluminium frame, and an adjustable handlebar/stem setup, with a sprung seat post for improved comfort. The low top tube, makes the bike sturdy and strong yet comfortable and easy to mount whilst providing additional protection to the battery.
Key Features
- Ergonomic bicycle Grips
- Comfortable sitting posture
- All important controls easily accessible
- Supplied with 48V to deliver a high output power
- Over 768Wh capacity for a longer distance
- Reach up to 150 km (depending on terrain conditions & power level settings)
- Easily removable battery so you can charge it anywhere
- A built-in USB port with 5V to charge mobile phones
- Equipped with Throttle and Pedal assist
BIKE COMPONENTS
Frame: Alu. 6061, 26"*17.3 inches / Alu. 6061, 27.5"*18.9 inches
Suspension Fork: Suntour, NEX-HLO
Brake: Hydraulic Disc Brakes
Freewheel: LY, 8 Speed, 11-32T
Tire: Schwalbe, Marathon/Big Ben
Saddle: Selle Royal, FREEWAY
Stem: Promax. MA-579
Crank: Das-Kit, CT48A, 48T
Shifter: Shimano, Altus, R:SL-M315-8R, 8 Speed
Derailleur: Shimano, Acera, RD-M360
Chain: KMC, Z51
ELECTRIC COMPONENTS
Battery: Das-Kit, i5-4816, 48V 16AH, 768WH, with an USB Port
Hub Motor Rated / Peak Power: Das-Kit, X15, 48V 250wh
Controller: Das-Kit, CT-i5, 48V18A
Charger: Das-Kit, 48V3A
Display: Das-Kit, C7
Front Light: Kendo, 48V, 30 Lux
Rear Light: DR009, AAA*2
Weight
Net Weight (with battery): 59.0 lbs
Battery Weight: 9.1 lbs
Max Load (driver+bike): 308.0 lbs
Warranty
- Leon Cycle provides 1 year warranty on all electronic parts (including battery, motor, controller, display, lights)
- Leon Cycle provides 2 year warranty on the bike frame. For more warranty information visit our FAQS.
- Apart from manufacture defects that could be present, parts that wear due to normal use (such as tires, brake pads, chains, spokes, freewheel, tire puncture etc) are not included in the warranty but maybe replaced on a case by case basis within the first 6 months. For more information contact Leon Cycle on 0390695443.
- Our bikes are water resistant but not waterproof. Water damage is not covered under warranty.
About NCM
Notes
In order to ensure our high quality standard, our bicycles are subjected to a functional test at the factory. This can lead to dust deposits on the tyres and the seat post. Our bikes are only delivered pre-assembled, a final fine adjustment and inspection by the buyer or a third party is necessary (costs incurred for this cannot be covered). Before riding, please check all screws for strength and carry out a fine adjustment of the gears and brakes. Check the tyre pressure. For more information contact us on 0390695443. Visit our Youtube channel for Assembly and New Arrivals Videos. Depending on the bicycle model, the final assembly and inspection of the components should take between 60 and 90 minutes.
IMPORTANT NOTICE:
The laws around the use of scooters/e-bikes on public lands, roads and areas vary from state to state.
We recommend you always check your local council and road traffic laws prior to using a scooter/e-bike to ensure you are aware of any restrictions that may affect the use of motorised vehicles.
Always use appropriate protective riding equipment such as an approved helmet and suitable clothing.
In the box
- 1 x NCM M3 E-bike
- 1 x DC483DE 48v charger
- 1 x tool kit
.jpg)
