The Marin Alpine Trail E2 is our top-end Alpine Trail, ready to tame the roughest and toughest of trails. For the best of the bunch, we’ve packed in the big-dog Shimano STEPs EP801 system and a long-lasting 630Wh battery, Fox 38/Float DHX2 Performance Elite suspension and a blend of Shimano XT and SLX 12-speed, including powerful TRP 4-piston brakes.
Key upgrades from Alpine Trail E1:
Key upgrades from Alpine Trail E1:
01. FRAME | Series 4 Alloy Frame, 150mm Multitrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor |
02. FORK | Fox 38 Performance Elite, 160mm travel, 29", 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender |
03. SHOCK | Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, S/M Spring Rate = 350lb, L/XL Spring Rate = 450lb |
04. MOTOR | New Shimano Motor |
05. BATTERY | BT-8036, Internal 630Wh |
06. RIMS | Front: Marin Aluminum Double Wall, 29” Diameter, 32mm Inner Rim Width, Sleeved Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5” Diameter, 38mm Inner Rim Width, Sleeved Joint, Disc Specific, Tubeless Compatible |
07. HUB REAR | Shimano HB-MT510B, 148x12mm, Centerlock, Microspline Freehub Body |
08. HUB FRONT | Shimano MT-410B, 110x15mm, centerlock Disc, 32H |
09. SPOKES | 14g Black Stainless Steel |
10. TIRES | Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8”, 3C Maxx Terra, EXO+, Tubeless Compatible |
11. DERAILLEUR REAR | Shimano XT 12-Speed, SGS |
12. SHIFT LEVER | Shimano SLX 12-Speed, I-Spec EV |
13. CRANKSET | Shimano XT M8150, 160mm Length |
14. CHAIN | KMC E12S, E-Bike Specific Chain |
15. CASSETTE | Shimano SLX M7100 Cassette, 12-Speed, 10-51T |
16. BRAKES FRONT | Shimano SLX, 4-Piston Hydraulic Disc, 203mm Rotor |
17. BRAKES REAR | Shimano SLX, 4-Piston Hydraulic Disc, 203mm Rotor w/ Speed Sensor |
18. BRAKE LEVERS | Shimano SLX Levers, I-Spec EV |
19. HANDLEBAR | Marin Trail, 35mm Clamp, 7000 Alloy Bar, 800mm Length, 20mm Rise, 5 Degree Up, 8 Degree Back |
20. STEM | Marin CNC, 35mm Length, 35mm Bar Bore |
21. GRIPS | Marin Grizzly, Lock On |
22. HEADSET | FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2” |
23. SEATPOST | X-Fusion Manic, 1x Composite Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm |
24. SADDLE | Marin E-MTB Saddle |
25. PEDALS | Marin MTB Plastic |
26. EXTRAS | Shimano Left Hand Switch , SC-E600 Display, Shimano CS-EM800, Shimano Battery Charger EC-E6002, Bolt-on Thru-Axle |
S | M | L | XL | |
---|---|---|---|---|
ASTACK | 613 | 622 | 631 | 640 |
BREACH | 445 | 465 | 485 | 505 |
CHEADTUBE ANGLE | 63° | 63° | 63° | 63° |
DHEADTUBE LENGTH | 100 | 110 | 120 | 130 |
ESEATTUBE ANGLE | 78° | 78° | 78° | 78° |
FSEATTUBE LENGTH | 390 | 400 | 425 | 430 |
GTOPTUBE EFFECTIVE | 575 | 597 | 619 | 641 |
HBB HEIGHT | 340.5 | 340.5 | 340.5 | 340.5 |
IBB DROP | 28 | 28 | 28 | 28 |
JCHAINSTAY | 435 | 435 | 435 | 435 |
KWHEELBASE | 1215 | 1239 | 1264 | 1288 |
LSTANDOVER HEIGHT | 681.6 | 681.4 | 686.8 | 689.8 |
MFORK OFFSET | 44 | 44 | 44 | 44 |
SEATPOST DIAMETER | 30.9 | 30.9 | 30.9 | 30.9 |
HANDLEBAR WIDTH | 780 | 780 | 780 | 780 |
STEM LENGTH | 35 | 35 | 35 | 35 |
CRANK LENGTH | 160 | 160 | 160 | 160 |
All lengths in millimeters
Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.
29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.
The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.
Recommended Sag = 30%/19.5mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
LBS | KG | COIL LB/IN |
---|---|---|
120 | 54 | 300 |
130 | 59 | 300 |
140 | 64 | 300 |
150 | 68 | 350 |
160 | 73 | 350 |
170 | 77 | 350 |
180 | 82 | 400 |
190 | 86 | 400 |
200 | 91 | 400 |
210 | 95 | 450 |
220 | 100 | 450 |
230 | 104 | 450 |
240 | 109 | 500 |
250 | 113 | 500 |
260 | 118 | 500 |
270 | 122 | 500 |
Our on-line store is open 24/7 and we ship Monday through Friday, excluding some holidays. Orders received for products without shipping restrictions on its product page will ship the same business day when received before 12:00 p.m.
Since 1938, Papanui Cycles has been serving the North West of Christchurch and after 80 years they are still offering great service.
Now established as one of Christchurch’s largest suburban cycle shops.
Offering top Global selling brands such as Merida, Marin, Apollo.
“Service is our number one goal,” says Kevin. “Everyone who works here is fully trained in sales along with mechanical and product knowledge, when it comes to cycles, we know our stuff.”
Everything from reliable commuting bikes to full suspension mountain bikes and carbon road bikes,
“With all Cycles we sell, not only do we give a manufacturer’s warranty, but exclusive too Papanui Cycles, we offer one Free General Service, valued at $93.00 after 2 months from date of purchase.”
Papanui Cycles has all your cycling needs and is looking forward to seeing you in store soon.
customersupport@papanuicycles.co.nz | FB | Instagram | 03 352 7495
Photographer
Just one word about the build quality of my Bike : Excellent - nothing more to say!
Sales
Exceptional quality and fast shipping. Just what I was looking for.
Programmer
Kevin & His Team were very helpful with my purchase recently.
Interior Designer
I already had high expectations based on my previous purchases, but I am still above satisfied!
Since 1938, Papanui Cycles has been serving the North West of Christchurch and after 80 years they are still offering great service.
Offering top selling Bike brands such as Merida, Marin, Hybrid, Buzz Bikes, Watt Wheels, Velectrix, Kalkoff, Avanti, Hiko, Malvern Star.
“Service is our number one goal,” says Kevin. “Everyone who works here is fully trained in sales along with mechanical and product knowledge, when it comes to cycles, we know our stuff.”
“With all Cycles we sell, not only do we give a manufacturer’s warranty, but exclusive too Papanui Cycles, we offer one Free General Service, valued at $93.00 after 2 months from date of purchase.”
Papanui Cycles has all your cycling needs and is looking forward to seeing you in store soon.
© 2024, Papanui Cycles - online - Powered by Shopify
Please Wait...